Soil fate of agricultural fumigants in raised-bed, plasticulture systems in the southeastern United States

Soil concentrations and degradation rates of methyl isothio-cyanate (MITC), chloropicrin (CP), 1,3-dichloropropene (1,3-D), and dimethyl disulfide (DMDS) were determined under fumigant application scenarios representative of commercial raised bed, plastic mulched vegetable production systems. Five days after application, 1,3-D, MITC, and CP were detected at concentrations up to 3.52, 0.72, and 2.45 μg cm, respectively, in the soil atmosphere when applications were made in uniformly compacted soils with a water content >200% of field capacity and covered by a virtually impermeable or metalized film. By contrast, DMDS, MITC, and CP concentrations in the soil atmosphere were 0.81, 0.02, and 0.05 μg cm, respectively, 5 d after application in soil containing undecomposed plant residue, numerous large (>3 mm) clods, and water content below field capacity and covered by low-density polyethylene. Ranked in order of impact on the persistence of fumigants in soil were soil water content (moisture), soil tilth (the physical condition of soil as related to its fitness as a planting bed), the type of plastic film used to cover fumigated beds, and soil texture. Fumigants were readily detected 13 d after application when applied in uniformly compacted soils with water contents >200% of capacity and covered by a virtually impermeable or metalized film. By contrast, 1,3-D and MITC had dissipated 5 d after application in soils with numerous large (>3 mm) clods and water contents below field capacity that were covered by low-density polyethylene. Soil degradation of CP, DMDS, and MITC were primarily attributed to biological mechanisms, whereas degradation of 1,3-D was attributed principally to abiotic factors. This study demonstrates improved soil retention of agricultural fumigants in application scenarios representative of good agricultural practices.     

Monitoring of Cr, Cu, Pb, V and Zn in polluted soils by laser induced breakdown spectroscopy (LIBS)

Laser Induced Breakdown Spectroscopy (LIBS) is a fast and multi-elemental analytical technique particularly suitable for the qualitative and quantitative analysis of heavy metals in solid samples, including environmental ones. Although LIBS is often recognised in the literature as a well-established analytical technique, results about quantitative analysis of elements in chemically complex matrices such as soils are quite contrasting. In this work, soil samples of various origins have been analyzed by LIBS and data compared to those obtained by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The emission intensities of one selected line for each of the five analytes (i.e., Cr, Cu, Pb, V, and Zn) were normalized to the background signal, and plotted as a function of the concentration values previously determined by ICP-OES. Data showed a good linearity for all calibration lines drawn, and the correlation between ICP-OES and LIBS was confirmed by the satisfactory agreement obtained between the corresponding values. Consequently, LIBS method can be used at least for metal monitoring in soils. In this respect, a simple method for the estimation of the soil pollution degree by heavy metals, based on the determination of an anthropogenic index, was proposed and determined for Cr and Zn.     

A new method for broad-scale modeling and projection of plant assemblages under climatic,biotic, and environmental cofiltering

There is increasing interestin broad-scale analysis, modeling, and prediction of the distribution and composition of plant species assemblages under climatic, environmental, and biotic change, particularly for conservation purposes. We devised a method to reliably predict the impact of climate change on large assemblages of plant communities, while also considering competing biotic and environmental factors. To this purpose, we first used multilabel algorithms in order to convert the task of explaining a large assemblage of plant communities into a classification framework able to capture with high cross-validated accuracy the pattern of species distributions under a composite set of biotic and abiotic factors. We applied our model to a large set of plant communities in the Swiss Alps. Our model explained presences and absences of 175 plant species in 608 plots with >87% cross-validated accuracy, predicted decreases in α, β, and γ diversity by 2040 under both moderate and extreme climate scenarios, and identified likely advantaged and disadvantaged plant species under climate change. Multilabel variable selection revealed the overriding importance of topography, soils, and temperature extremes (rather than averages) in determining the distribution of plant species in the study area and their response to climate change. Our method addressed a number of challenging research problems, such as scaling to large numbers of species, considering species relationships and rarity, and addressing an overwhelming proportion of absences in presence–absence matrices. By handling hundreds to thousands of plants and plots simultaneously over large areas, our method can inform broad-scale conservation of plant species under climate change because it allows species that require urgent conservation action (assisted migration, seed conservation, and ex situ conservation) to be detected and prioritized. Our method also increases the practicality of assisted colonization of plant species by helping to prevent ill-advised introduction of plant species with limited future survival probability.     

Metal inclusion in expanded clays

The possibility to include in expanded clay little amounts of metallic ions present in waste material, without significant influence on the environment, was investigated. In this article, known quantities of cadmium(II), lead(II), chromium(III), and chromium(VI) were added to a mixture of raw pit clay, adding a small amount of mineral oil. The resultant paste was heated at 1200°C, in conditions to provide the commercial product with the best characteristics of lightness. The obtained pellets were analyzed in two ways. A sample of expanded clay was crushed, added to with KNaCO₃ and melted. The melted mass, after cooling, was dissolved in HCl or in water and analyzed. The composition of the raw pit clay was analyzed as a blank. In parallel, pellets were subjected to a leaching process and the eluate was analyzed for the added cations. The concentration of the metal ions in the leached water is negligible compared with that generally admitted in drinking water.     

Optimization of tourism impacts within protected areas by means of genetic algorithms

The search for a balance between nature conservation and tourism development within protected areas is becoming an increasingly multifaceted problem worldwide, as outlined by an increasing number of authors and highlighted at several international events. Since it is unlikely that all management objectives will reach their optimum values simultaneously, an optimization approach is required to meet multiple, conflicting goals and to obtain an overall trade-off in terms of the conceived objectives.     

Coastal hazard due to submarine canyons in active insular volcanoes: examples from Lipari Island (southern Tyrrhenian Sea)

The recent high-resolution multibeam bathymetry surveys around Lipari Island allowed to evidence several submarine canyons, whose head often cut back up to very shallow water and at a few tens of meters far from the coast. These canyons are mainly located in the eastern and southern side of the island and are characterized by an ongoing retrogressive (landward) erosion, that also controlled the shape and the evolution of the coastline. The canyon heads are formed by minor slide scars. By coupling slide scar morphometry and simple numerical model we have been able to roughly estimate the potential tsunami wave amplitudes generated by related slope failures. Moreover, the retrogressive erosion of canyon heads can be claimed as a cause of the enhanced subsidence reported in the last few thousand years in the eastern part of Lipari, where the main villages are located. Based on these evidence, we propose a first assessment of the coastal hazard due to marine retrogressive activity in the largest and most densely populated island of the Aeolian Archipelago.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Properties of Glauconite/Polyaniline Composite Prepared in Aqueous Solution of Citric Acid

Hybrid composite made of glauconite and polyaniline was prepared in aqueous solution of citric acid. Scanning electron microscopy combined with energy dispersive X-ray analysis shows uniform aggregates made of glauconite microparticles and polyaniline matrix. The results of X-ray powder diffraction suggest that: (1) citric acid used for the polymerisation of aniline causes formation of emeraldine salt where macromolecular ordering in the amorphous polymer takes place; (2) no chemical interaction between glauconite and emeraldine takes place in the prepared composite. FT-IR spectra of the prepared polymer and composite show features indicating all the functional groups that are present in the diiminoquinone–diaminobenzene state of polyaniline. Thermal stability of the composite was higher than the prepared polymer suggesting the occurrence of an interphase interaction between glauconite and emeraldine. After pyrolysis in purified nitrogen the composite still remained glauconite, and ε-Fe3N together with amorphous and graphitic carbon were found as reaction products. The values of electrical conductivity and magnetization of the composite suggest that optimization of these values might be achieved based upon the relationship between glauconite and polyaniline.